User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- x -
Preface
• Cloth: A piece of cloth is the best tool to use when rubbing up a
component. Although paper towels or tissues can be used on most
hardware as well, we still recommend you to rub it with a piece of cloth.
• Water or rubbing alcohol: You may moisten a piece of cloth a bit
with some water or rubbing alcohol and rub it on the device. Unknown
solvents may be harmful to the plastics parts.
• Vacuum cleaner: Absorb the dust, dirt, hair, cigarette particles, and
other particles out of the device can be one of the best cleaning
methods. Over time, these items can restrict the airow in a device and
cause circuitry to corrode.
• Cotton swabs: Cotton swaps moistened with rubbing alcohol or water
are excellent tools for wiping hard to reach areas in your keyboard,
mouse, and other locations.
• Foam swabs: Whenever possible, it is better to use lint-free swabs such
as foam swabs.
Recommended Cleaning Procedures
1. Close all application programs
2. Close operating software
3. Turn o the equipment
4. Remove all peripherals
5. Disconnect the power cable
6. Proceed to clean.