User`s manual

- 30 -
Driver & AP
3.5 DIN Rail Mounting (optional)
3. As the gure shown below, align the screw holes of the DIN rail bracket with
the ones of the main unit. Use the screwdriver to secure the bracket to the
main unit with the accompanying screws.
Prepare the DIN rail kit and a screwdriver for DIN rail mounting. Follow the
instructions below:
1. Place the Box PC upside down on a at surface and locate the 4 rubber
foot screws.
2. Unscrew them and separate the screws from the rubber feet. Keep the
rubber feet for later use.
4. You can mount the BOX PC on a DIN rail in the horizontal or vertical
direction.
5. Fasten a pair of DIN rail clips to the DIN rail bracket which was attached to
the main unit. Please refer to the following gures for horizontal and vertical
orientation mounting.