User`s manual

- 67 -
Appendix
5. Prepare RF cable, washer, nut included in WiFi or HSUPA module. The cable
has an SMA connector on one end and an MHF connector on the other.
6. Connect RF cable’s MHF connector to the WiFi module’s “MAIN” connector.
7. Remove the washer and the nut from the other end of the RF cable, which
is an SMA connector. Save the washer and nut for later use. Note the SMA
connector has the form of a threaded bolt, with one at side.
Remove
the nut and
washer.
Among the screw
thread, there is a
at side.
MHF connector
SMA connector
washer
nut