User`s manual

- 65 -
Appendix
Appendix C: HSUPA or WiFi Module Hardware Installation
To be able to network with 3G, hardware-wise the computer needs the HSU-
PA module HSPA-SI1400 installed and a SIM card inserted (as described in
Section 4.1.5 Install SIM or CFast Card on page 31). To use WiFi connection, the
WiFi module HIFI-IN1300 should be installed instead. This section will guide you
through hardware installation, and see next section for software and application
installation.
1. Remove the computer’s top
cover as described in Section
4.1.1 Remove Top Cover on page
28
. Find the Mini-card socket
for WiFi or 3G module on the
board.
2. Execute this extra step for
WiFi module. Prepare the
WIFI-IN1300 WiFi module
kit. The module is a half-size
module of PCI Express Mini-
card form factor, with two U.FL
connectors, one is “MAIN“,
and the other is “AUX“.
Two U.FL connectors,
one is “MAIN”, the other
is “AUX”.
In order to make the half-size WiFi module compatible with the Mini-card
socket, extend the WiFi module with a “mini half bracket”. Join them together
by using two screws.
Position the WiFi
module and the
“mini half bracket”
exactly as shown.
Join the WiFi
module and the
“mini half bracket”
by two screws.
Mini-card socket