User`s manual

- 50 -
BIOS
Device reset time-out
USB mass storage device Start Unit command
time-out.
► Options: 10/20 (default)/30/40 sec
Device power-up delay
Maximum time the device will take before it prop-
erly reports itself to the Host Controller. ‘Auto’ uses
default value: for a Root port it is 100 ms, for a Hub
port the delay is taken from Hub descriptor.
► Options: Auto (default), Manual
Setting Description
Serial Port 1~4 Conguration See next page.
5.2.6 Super IO Conguration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (c) 2011 American Megatrendes, Inc.
→←: Select Screen
↓↑: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save and Exit
ESC: Exit
Advanced
Super IO Configuration
► Serial Port 1 Configuration
► Serial Port 2 Configuration
► Serial Port 3 Configuration
► Serial Port 4 Configuration
Set Parameters of
Serial Port 1 (COMA)