User`s manual
- 42 -
BIOS
The BIOS Setup utility for the computer is featured by American Megatrends
Inc to congure the system settings stored in the system’s BIOS ROM. The
BIOS is activated once the computer powers on.
To enter the BIOS Setup utility, keep hitting the “Delete” key upon powering
on the computer.
This BIOS Setup utility is updated from time to time to improve system
performance and hence the screenshots hereinafter may not fully comply with
what you actually have onscreen.
Keystroke Function
◄ ►
Move to highlight a particular conguration screen from
the top menu bar / Move to highlight items on the screen
▼ ▲ Move to highlight previous/next item
Enter Select and access a setup item/eld
Esc
On the Main Menu – Quit the setup and not save
changes into CMOS (a message screen will display
and ask you to select “OK” or “Cancel” for exiting and
discarding changes. Use “←” and “→” to select and press
“Enter” to conrm)
On the Sub Menu – Exit current page and return to main
menu
Page Up / +
Increase the numeric value on a selected setup item /
make change
Page Down -
Decrease the numeric value on a selected setup item /
make change
F1 Activate “General Help” screen
F10
Save the changes that have been made in the setup and
exit. (a message screen will display and ask you to select
“OK” or “Cancel” for exiting and saving changes. Use “←”
and “→” to select and press “Enter” to conrm)
Key Commands
The BIOS Setup utility relies on a keyboard to receive user’s instructions. Hit
the following keys to navigate within the utility and congure the utility.