User`s manual

- 36 -
Installation and Maintenance
4.2.3 DIN Rail (optional)
1. Remove the box PC’s rubber feet as described in Section 4.2.1 Wall-Mount
(optional) on page 33
. Align the screw holes of DIN rail bracket covered
in DRK-001 with the ones on the bottom side of FPC-3131. Secure the
bracket to FPC-3131.
2. Mount the box PC on a DIN rail in the horizontal or vertical direction. For
veritcal direction, secure two DIN rail clips to the DIN rail bracket as left
picture. For horizontal direction, as right picture.