User`s manual

- 31 -
Installation and Maintenance
4.1.5 Install SIM or CFast Card
4.1.4 Install WiFi or HSUPA Modules (optional)
The computer supports a CFast card for storage and a SIM card for 3G network-
ing. Two outside-accessible slots are featured for the installation of a CFast card
and a SIM card. Follow through the guide below to install them to the computer.
Note:
a. Be sure to turn off the computer before installing or un-installing the CFast
card in case the OS is installed on the card.
b. To make use of a SIM card for 3G networking, a 3G module is also needed
on the computer, see Appendix C: HSUPA or WiFi Module Hardware Installation
on page 65
to install the 3G module HSPA-SI1400.
1. Find the CFast/SIM card door on the front panel. Use a crosshead screwdriver
(#1 tip) to unscrew the door. Once the screw is removed, the card door can be
opened and taken off. Save these components for later use.
The computer also comes with a Mini-card socket for WiFi (WIFI-IN1300) or
HSUPA (HSPA-SI1400) module. See Section 1.5.1 Optional Accessories on
page 5
and contact your regional dealer to order these modules.
HSPA-SI1400
HSUPA 3.75G module kit & internal wiring
WIFI-IN1300
Intel
®
Centrino
®
Advanced-N 6205 WiFi module w/ 20cm internal wiring
See Appendix C: HSUPA or WiFi Module Hardware Installation on page 65 & Ap-
pendix D: HSUPA or WiFi Module Software & Application Installation on page 69
to
know how to install the hardware and software for both modules.
Installation
Illustration
CFast slot
SIM slot