Specifications

Loose battery terminals
Momentary interruption in power supply
(loose battery terminal). The module shall not
reset for battery dropouts less than 50ms no
more frequent than every 2 seconds.
Fusing
The unit is not fused. It relies on upstream
fusing.
Battery connections
6.3mm spade terminals
Total current
<2A
Digital Outputs
Item
Specification
Output count
3
Load maximum power
5W per output
Load inductive energy
6mJ maximum It is assumed that the
outputs primarily drive relays.
Inrush current handling
Not required
Fault diagnostics
Not required
Short circuit handling
Tolerant of short circuit to ground
Short to battery
This can back feed through and power the
unit
Analogue Input (pressure transducer)
Item
Specification
Analogue input count
1
Analogue input range
0-5VDC
Analogue input power feed
0.5A maximum
Dedicated 5V power pin
1
Dedicated ground pin
1
Communications
Item
Specification
RF
Bluetooth V4.0 compliant, SSP profile,
client/slave
Environment
Item
Specification
Temperature range
-20C to +85C
Water proofing
IP65
Conformal coating
yes
Enclosure
Custom plastic injected moulding
EMC susceptibility
Automotive transients present on power
supply, inputs and