Quick Start Guide

LINX TPMS MODULE
Part Number: 7450116
Latest Revision Date: 01/04/2019 Page 1 of 2 Fitting Instruction Number: 3789891
QUICK START GUIDE
This module enables communication between ARB LINX and the ARB TPMS sensors.
Installation
The LINX TPMS Module should be positioned in a fairly central location in the vehicle, equidistant for all wheels. This will ensure
the best performance from all TPMS tyre sensors. Under the armrest centre console is a good location. It is a central location and
in most vehicles it also has 12VDC outlet which can be used to power the module.
The LINX TPMS module should be secured in place using at least one of the screw holes or using cable ties.
Test for a 12VDC circuit that turns on when the vehicle key is in the ACC or ON position. The circuit must also be off when the
vehicle key is in the off position, hence not a permanent battery connection or else the module will continue to draw power from
the vehicle battery when the vehicle is turned off.
Connect the RED wire to this circuit using a suitable method such as an insulated wire tap, or a solder and tap. A 12VDC power
outlet or cigarette lighter socket provides this functionality and is the ideal place to piggy back power from.
Connect the BLACK wire to the vehicle ground.
Connection to LINX
To connect the LINX TPMS module to LINX, turn the vehicle key to the ACC position so that both the TPMS module and LINX are
on.
Navigate LINX to the main icon screen and activate the TPMS module.
In the TPMS module settings screen, tap the ‘Connect to TPMS’ button, and select your TPMS module from the list.
When connected the vehicle icon on the TPMS module will be highlighted as shown.
To learn the TPMS tyre sensors that are associated to your vehicle follow the instructions in the latest LINX Operation Guide.