User Guide

Compressor Kit, Twin Portable 12V || www.arb.com.au
2
ADDITIONAL FEATURES:
• Anti-vibration / sound deadening is integrated into the mount.
• Engineered, built and individually dyno-tested in Australia from local and imported components.
• Fully serviceable with all replacement parts available.
• Constructed primarily of light weight, high strength engineering grade materials, including military and aerospace
standard components.
• Hard-anodized cylinder bores and PTFE (Teon) impregnated carbon ber piston seals for reduced friction and
maximum trouble free life.
• Built with sealed components for moisture and dust resistance.
• Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush
pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
• Compressor pistons are equipped with high shock rated roller bearing.
• High density and high ow washable sintered bronze air lter element.
• Motors are thermal cut-out protected against damage caused by extreme temperature use.
• Pressure switch and relay equipped electrical system prevents run-on when not lling, or any damage to
compressor or hoses as a result of the pressure generated from a kinked air line.
• Illuminated isolating switch is easy to see at night, and protects the user from hazardous sparking when
connecting the alligator clips to the battery terminals.
• Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in
case of a fault.
• Over-pressure safety valve equipped as a back-up protection from either pressure switch failure, thermal over
pressure generated in a hot vehicle (i.e., no need to drain pressure when nished use.), or accidental connection
to an external high pressure source.
• CE and C-Tick compliant.
CARRY CASE FEATURES:
After looking at the many cases available on the market, ARB Engineers decided that none met their exact requirements
for the ARB Twin Portable compressor. The case needed to be compact, yet hold all accessories and air tank whilst
also being extremely strong to handle the rigors of 4WDing and commercial use. Considerable time was therefore spent
designing and testing a case that has features unique to ARB.
• Enlarged carry handle to suit a gloved hand.
• Enlarged latches to suit a gloved hand.
• Aluminium latches ensure that no compression set in the latches occurs over time and so we were able to
reduce the clamping force (make them easier to unlatch) versus our competitors who all use plastic latches that
will loosen up over time, and have subsequently needed to make their latches extra-extra uncomfortably tight
when new to compensate.
• One piece heavy duty hinge.
• Shatterproof polymer compound (airport tested!)
• 2 sides are textured, logo’d, generally attractive – not just the top as with most other cases.
• Air travel equaliser valve to combat cabin pressure crush when landing.
• Water tight seal in lid.
• Volume of case will assure the portable CKMTP12 oats if dropped in water.
• Quick-change (removable) accessory pocket mounts.
• Slotted internal design to suit organisers/dividers (not included).