Installation Manual

6 Parts List
24
CKMTA12 & CKMTA24
Air Compressor
Specs:
ITEM # QTY DESCRIPTION PART # NOTES
01(a) 2 COMPRESSOR ASSEMBLY (12V) CKM01 1
Voltage 12 Volts (CKMTA12), 24 Volts (CKMTA24)
01(b) 2 COMPRESSOR ASSEMBLY (24V) CKM02 1
Current Draw No-Load 28A (CKMTA12 only)
02 1 TWIN COMPRESSOR MOUNT ASSEMBLY 320108
Load 50A (CKMTA12 only)
03 3 O-RING (BS031N70) 160241 2
Air Flow 174.3L/min @ 0Bar [6.16CFM @ 0psi]
04 1 COUPLER MANIFOLD 320227
131.7L/min @ 2Bar [4.65CFM @ 29psi]
05 2 FLAT WASHER (M6) 6151046
Total Weight
8.8kg [19.4lbs]
06 2 HEX BOLT (M6 x 60mm) 200703
Size 102mm x 190mm x 275mm (H,L,W)
07 2 O-RING (METRIC 6X2 N70) 160242
[4.0” x 7.5” x 10.8”]
08 1 MANIFOLD CAP 320214
Outlet Port
1
/
4
” NPT
09 1 PRESSURE SWITCH (1/4” NPT) CO35
Pressure Switch Open 10.3Bar [150psi]
10 8 HEX BOLT (M6 x 12mm) 200702
Pressure Switch Closed 9.3Bar [135psi]
11 1 COVER ASSEMBLY, CKMT 320110
Safety Valve OPEN @ > ~12.4 [180 PSI]
12 2 O-RING (BS029N70) 160250 2
13 2 AIR FILTER FLANGE (1/4” NPT) 320212
14 2 AIR FILTER COVER 320501A 3
Notes:
15 2 AIR FILTER ELEMENT (DISK TYPE) 290503 3
16 2 AIR FILTER BASE 320501B 3
*
4 HEX BOLT (M6 X 20mm) 6151213
*
4 FLAT WASHER (M6) 200709
1
Motor voltage is the only difference between
*
4 NYLON LOCK-NUT (M6) 6151223
The CKMAT12 and CKMTA24 compressors.
*
1 WIRING LOOM SUPPLY (CKMTA12 /24) 180414 4
CKM motors are serviceable. Contact ARB.
*
1 WIRING LOOM SWITCH (CKMTA12 / 24) 180415 4
*
1 RELAY (12V,40A) CO42
2
Complete set of O-ring seals is also available
*
1 SWITCH (12V) 180209
as O-ring Service Kit #320301.
*
1 SWITCH COVER (COMPRESSOR) 180212
*
2 FUSE,40A,MAXI TYPE 180703
3
AIR FILTER COVER (14) & BASE (16) available
*
1 INSTALLATION GUIDE,CKMA 2102MTA
only in AIR FILTER ASSY #320501 which also
includes the element.
4
Wiring looms set of #180414 & #180415 suits both
12 & 24 volt systems. See full wiring diagram attached.
#
Available separately or included with Air Locker kits.
*
Not illustrated in exploded view.