Installation Guide

On the installation day
Install the Cloud Connectors in the locations
found during planning.
Visit support.d21s.com to see best practices for
Cloud Connector installations
Remove the bracket by rotating it counter
clockwise and remove the battery tabs to
activate the sensor

The Cloud Connector will automatically start to
relay data from the sensor to the cloud service.
The size of the detection area depends on the
installation height of the sensor.
The maximum installation height possible is 3.6
meters (12 ft) which will result in a detection
area diameter of 14 meters (46 ft).
Claim the sensor in Studio by scanning the QR
code found on the device. The same code is
printed on the packaging label.
The sensor is now be available in Studio and you
can give it a name, e.g. “Main Meeting Room”.
1
2
3
4
5
The sensor reacts to heat from people moving
across its eld of view and will not detect people
behind a glass wall.
In high sensitivity mode, the sensor will detect the
presence of people with minimal movement, like
sitting in a chair. Low sensitivity mode requires
more motion to trigger the sensor.
Main Meeting Room
Sensor name
Ceiling 3.6m high (12ft)
Floor
Glass wall
14m (46ft)
Installation Height
2.4 meters ( 8 ft)
3 meters (1 0 ft)
3.6 meters (12ft)
9 . 5 meters (31ft)
12 meters (4 0 ft)
14 meters (4 5 . 9 ft)
Detection Diameter