User Guide

Ava Bullet - Adapter Plate • Mounting guide | 3/5
Copyright © 2022, Ava Video Security. All rights reserved.AVA-ADA-PLA-MG-01
Installing the adapter plate
Determine which hole pattern to use by
measuring the threaded holes on your
junction box.
1
2
Locate the corresponding pattern on
the adapter plate and drill the holes.
3
To avoid junction box water ingress we
recommend to apply sealant between
the Adapter plate and the wall.
Make sure the junction box can carry the
weight of the installed camera.
Wall mount is also supported, refer to the
Datasheet for more information.