User Instructions

ArapahoTechnologiesInc. LiquidAider™ DraftMay2019Instructions
PAIRING THE BUTTON AND THE PUMP
 The LiquidAider pump and button are paired during manufacturing.
 There is absolutely no way that the button and pump can become accidentally
unpaired.
 You can pair any number of pumps to one single LiquidAider button. This is a
great feature for team racing like Baja 1000 where the bike is shared among
riders.
 Each rider needs a complete LiquidAider kit, minus the button.
 You can also have LiquidAider buttons on each of your bikes, and pair your
hydration pack to the bike you want to ride.
To pair a button with a pump:
1. Press the square “mode” button on the LiquidAider handlebar button for a few
seconds until the middle LEDs start blinking.
2. With pump turned on, press the square power button on the pump until the
LED starts blinking.
3. Press the trigger button on the handlebar button one time and let off.
4. All blinking LEDs will turn off.
5. The button is now paired to the pump.
6. Repeat this process individually with multiple pumps to pair all rider pumps
with the one handlebar button.
Use this process to pair your one hydration pack to any of your bikes you wish to
ride.