User manual

44 FastSCAN
For more information on Cast Inversion Mode refer to the Cast Inversion Manual or
contact Aranz Scanning Ltd ([e-mail], www.aranz.com,
www.fastscan3d.com).
(A license is required to enable this function.)
9.2.3 Laser Pointer/Mark with Mouse/Stylus Mode
The Laser Pointer, Mark with Mouse and Stylus modes enable the user
to place reference points and/or lines on the surface of the scanned ob-
ject.
For more information on Mark with Mouse/Stylus Inversion refer to the
Mark with Mouse/Stylus Manual or contact Aranz Scanning Ltd
([e-mail], www.aranz.com, www.fastscan3d.com).
(A license is required to enable these functions.)
Note: Special Functions Available With The Stylus:
When in Laser Pointer Mode a double-click of the Wand trigger will
remove the last stylus point or line placed. A triple-click will remove
all points/lines. As noted above these features can be enabled/disabled
under Settings/Wand drop down menu.
9.2.4 Export as AAOP/OP3 object
AAOP/OP3 is a 3D file format supported by a number of orthotics and prosthetics
CAD packages.
(A license is required to gain access to the AAOP/OP3 Wizard.)
9.3 FastSCAN
TM
Pipe Interface
The FastSCAN
TM
Pipe Interface (FPI) allows another application program to access 3D
scan data from the FastSCAN
TM
program in real-time during scanning of an object.
For further details on how to use the FPI, please refer to the file
FastScanPipeInterface.txt, usually found at:
C:\Program Files\Polhemus\FastSCAN\PipeInterface