User manual

6 FastSCAN

5. It is normal for Windows to report that FastSCAN

drivers have not passed

Windows Logo testing/are not digitally signed by Microsoft. Click Continue

Anyway each time when prompted until the drivers are installed.

Note: This procedure needs to be repeated when plugging the scanner into a different

USB port.

For Windows Vista:

1. Before powering up the PU connected to your computer click:

Start/Settings/Control Panel to open the Control Panel window.

2. Double-click on System.

3. In the System window click on Advanced System Settings.

4. In the Advanced System Settings window choose the Windows Update Driver

Settings button.

5. Select the middle option: Ask me each time I connect a new device before

checking for drivers.

6. The drivers should now automatically install when you power up the FastSCAN

system connected to your computer.

2.5 Running FastSCAN

1. Ensure the system is fully connected and the scanning environment set up as

desired.

2. Turn on the PU. The green light on the front of the PU should ﬂash for approx-

imately 10 seconds and then stay on. If it doesn’t, check that the Wand cable

and power supply are correctly connected.

3. Start FastSCAN

by double clicking on its desktop icon. The FastSCAN

startup screen (Figure 3) will appear.