User manual

4 FastSCAN
2.2 Computer Requirements
• Windows Vista or XP (SP2) 32 or 64 bit OS, or Windows 2000 SP4.
◦ 1 GHz Intel Pentium III or greater
(2 GHz Intel Pentium IV or greater recommended for RBF processing)
◦ 512 MB RAM or greater.
◦ USB port.
• OpenGL compatible hardware accelerated graphics adapter in 32-bit (true color)
mode (minimum resolution 1024 x 768).
2.3 Installing the Software
Important: In order to install FastSCAN
TM
ensure you have administrator privileges
on the computer.
Note to Windows Vista users: Before installing the FastSCAN
TM
software do the fol-
lowing:
• Go to Start/Settings/Control Panel/User Accounts.
• Uncheck the box Turn user account On/Off.
• Click OK.
The installation procedure is as follows:
1. Insert the FastSCAN
TM
CD. The set-up program should start automatically. If
it doesn’t, open the FastSCAN
TM
CD folder manually and double-click on the
FastSCAN Setup.exe file to run the wizard.
2. You will be guided through the installation of the FastSCAN
TM
software. Install
the FastSCAN
TM
files in the default directory. The setup program will also install
the USB drivers automatically. During the process you may be alerted that
the FastSCAN
TM
USB software has not passed Windows Logo Testing—if this
happens click the Continue Anyway button. You will be prompted to restart
your computer if necessary.
3. When the software has finished installing open the CD folder, double-click on
the license file FastSCAN.lic.exe and follow the instructions.
4. After the license file has installed double-click on the wand(model#)CFG.exe
file to install the calibration data for your particular Wand.