Anti-Theft Wall mount USER GUIDE
1 Components: screw, screwdriver, wall mount, wall plug
2 Put the wall mount in the mounting hole on the backside of the Aranet4 sensor
3 Push the wall mount upwards in a locked position
4 Put the screw into the wall mount
5 Drill a hole in the wall in the desired location.
6 Push wall plug into the hole
7 Screw Aranet4 to the wall. Use a screwdriver with a security Torx T15 bit.
8
11 9 aranet4.com Aranet4 is mounted to the wall and ready to measure indoor air quality! Copyright © 2021 SAF Tehnika, JSC. All rights reserved.
