Quick Start Guide

6
Recommended use of the Jumper Cable
You can mount your access point to the electrical box in one of two positions, shown below. These options are
provided to provide cable bend relief for cables of dierent lengths and thicknesses. Illustrations do not reflect
pre-install steps. Run the wire or jumper prior to connecting the access point.
Position A (820)
Position B (520/820)
Note: Jumper is needed when using Cat 6A in Position B.
Center line
Double Gang Box
(not included)
Single Gang Box
(not included)
Cat 5e
Jumper
Cat 6A
Center line