E650FS-BK CPSIA#2-E650FS-BK- -MW
H9 - 12 x 3.5mm Phillips Round Head Screw (56) H14 - 8.
Must be flush Important note: Groove from Parts J, N & L must be align before tighten H1 bolts. Support block must face down Important note: Do NOT tighten H5 bolts. Finger tighten only.
Important note: Groove from Parts J, N & L must be align before slide Part R into groove.
Must be flush
Phillips Round Head Screw (H9). H9 H9 Phillips Round Head Screw - 16 pcs H9 H9 H9 H9 H9 H9 Important note: H9 Screws must be screwed straight.
Important note: This step requires help from another adult.
2 pcs 5
Attach Upper Cabinet Assembly to Lower Cabinet Assembly using 4 pcs Allen Head Bolts (H13), 4 pcs Flat Washer (H14) and 4 pcs Phillips Flat Head Bolts (H1) See Figure 10. Tighten, but do Not over tighten or strip our H14 & H1 Bolts.
Phillips Round Head Screw (H9). H9 Phillips Round Head Screw - 26 pcs Top Part F must flush with bottom part of Part S.
E650FS-BK Ref Part# DescripƟon Qty A E650FSBK-A Lower LeŌ Side Panel 1 B E650FSBK-B Lower Right Side Panel 1 C E650FSBK-C Top & BoƩom Shelves 2 D E650FSBK-D Middle Shelves 2 E E650FSBK-E Base Cross Panel 1 F E650FSBK-F Lower Back Cover 1 G E650FSBK-G Door Panel 1 J E650FSBK-J Upper LeŌ Side Panel 1 K E650FSBK-K Upper Right Side Panel 1 L E650FSBK-L Upper SecƟon BoƩom Panel 1 M E650FSBK-M Dartboard Anchor Panel 2 N E650FSBK-N Upper Panel 1 P E650FSBK-P Up
