Quick Start Guide

4
DC In Aux
In
Volume
Power/Pair
Lighting
Modes
Add
Speaker
Using the Lighting Modes
The Lighting Mode buttons give you control over this speaker’s built-
in multi-mode lighting. You can use the lighting whether the speaker’s
on or off.
Press the Lighting Modes button to cycle through the multiple
lighting modes:
Big Flame and Small Flame provide different levels of the
speaker’s flame lighting effect.
Pulsing Flame provides a flame effect that pulses to the beat of
your music.
White Light provides a so white light.
O turns the speaker’s lighting off.
Speaker back
DC In Aux In
Volume
Power/Pair
Lighting
Modes
Add
Speaker
Adding Speakers (Stereo Mode)
If you have a second AR Sedona wireless speaker, you can use it together
with this one in stereo mode. To use 2 AR Sedona speakers together
in stereo mode:
1. Turn on both speakers. (Press and hold the Power/Pair button on the
back of each.)
2. Press and hold the Add Speaker button on the back of the first
speaker until the Power/Pair light starts flashing white.
3. Press and hold the Add Speaker button on the back of the second
speaker until its Power/Pair light starts flashing white.
4. The speakers announce “le connected” and “right connected” when
they’re ready to play in stereo.
Once the speakers are connected with each other, the le speaker will
try to pair to your phone (its Power/Pair light will blink fast). Find the
AR Sedona in your phone’s Bluetooth menu and connect to it. Once
the speakers are connected to your phone, the right speaker’s Power/
Pair light will go solid white. The le’s Power/Pair light also goes solid
white and blinks off every 5 seconds. Keep your phone close to the le
speaker—that’s the one it’s connected to!
DC In Aux
In
Volume
Power/Pair
Lighting
Modes
Add
Speaker
Speaker back
DC In Aux In
Volume
Power/Pair
Lighting
Modes
Add
Speaker