Product Manual

11
• Make sure the “ON/OFF” switch is in the “OFF”
position. The power switch has international symbols
for ‘on’ and ‘off’: On (|) Off (O).
• Unwind the power cord completely and plug the GFCI
into a grounded 120 volt outlet.
• Turn on water supply at the faucet to completely
open.
• Release safety push trigger lock up and back into
trigger. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water
and air out of the hose. Push trigger lock back down
to lock back into place.
• Turn the power switch to the “ON” (|) position. The
unit will turn on for 1 - 2 seconds and shut off. This is
a normal function of the auto start feature.
• Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer.
• Allow the motor to come to a complete stop before
squeezing the trigger again.
• Squeezing and releasing the trigger rapidly will
cause the auto start feature to miss an on/off cycle
that may prevent it from working properly. Use slow
deliberate trigger pulls to avoid such symptoms.
OPERATING INSTRUCTIONS
OFF/0
ON/I
OFF/0
ON/I
• Always test a small area to avoid chance of
damaging the surface.
95497_IM_BC 111 HS_ENG-FR-SP.indd 11 2020/5/22 下午2:48