Installation Guide

ManualsBrandsAR Blue Clean ManualsKitchen1750-PSI 1.5-GPM Electric Pressure Washer with Total Stop System

Pump

Hose

High Pressure Hose

Pump

Reset

Package content:

1. Pressure Water Unit

2. Manual

3. Adjustable Spray Nozzle

4. Turbo Nozzle

5. Gun

6. Detergent Tank

7. Nozzle Cleaning Tool

8. High Pressure Hose

9. Garden Hose Fitting

10. Accessories Holder

Gun Safety Button (D)

1 2

2. Install with supplied

screws. Tools needed 1

phillips screwdriver.

4. Insert lance adapter into the

gun push and turn clockwise to

positive stop as shown.

5. Press release button on

bottom of gun toward back of

the gun, then insert high pressure

hose.

6. Attach the high

pressure hose onto the

pump water outlet by

turning clockwise and

hand tightening.

3. The gun and turbo nozzle

lance combined creates a handy

wheel around handle. Remove

detergent bottle insert gun with

turbo nozzle lance to use as a

handle and replace detergent

bottle.

7. a) Attach swivel adapter to

pump water inlet, if not already

attached. Notice the swivel

adapter is marked with the words

pump and hose. Make sure to

connect pump side of the adapter

to the pump water inlet to prevent

damage to the threads.

b) Attach garden hose to swivel

adapter side marked hose.

Trigger

Gun Safety

Button

8. Activate the lock by

holding the gun and push

the lock from left to right.

Squeeze trigger to make

sure the trigger does not

move. The saftey trigger

lock should be locked at

all times when pressure

washer is not in use.

9. a) Plug the power cord

into a grounded 120V outlet

and press the reset button as

shown.

b) THIS MUST BE DONE

EACH TIME THE UNIT IS

PLUGGED IN AN OUTLET.

Assembly And OperAtiOns sheet

Assembly

OperAtiOns

Ar240

Summary of content (2 pages)

PAGE 1
Assembly and Operations Sheet AR240 Assembly 1 2 3 10 1 2. Install with supplied screws. Tools needed 1 phillips screwdriver. 2 9 6 8 3 3. The gun and turbo nozzle lance combined creates a handy wheel around handle. Remove detergent bottle insert gun with turbo nozzle lance to use as a handle and replace detergent bottle. 7 4 4 5 D Package Content: 1. Pressure Water Unit 2. Manual 3. Adjustable Spray Nozzle 4. Turbo Nozzle 5. Gun 6. Detergent Tank 7. Nozzle Cleaning Tool 8.
PAGE 2
Operations Continued 10 11 On Off 10. a) Pull trigger then turn on power switch. b) After turning off power, pull trigger to relieve line pressure before removing spray gun and hose. 11. Spray pattern shape and intensity can be changed by twisting the spray adjuster at the end of the lance. Keep hands clear of the front of the lance to prevent injury. 12 13 12. The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains.