Installation Guide

STEP 1

Fill the cold water tank with approximately four glasses of water

STEP 9

STEP 2

Drain this water through the cooler by opening the cold water faucet

STEP 10

STEP 3

Fill the cold water tank again with approximately four glasses of water

STEP 11

STEP 4

Drain this water through the cooler by opening the hot water faucet

(this may take more time then through the cold water faucet as done

previously)

STEP 12

STEP 5

Insert the cleaned baffle back into the cold water tank

STEP 13

Cleaning Your Water Cooler

Turn the water source off

Unplug cooler

Drain water out of the hot faucet until the water reaches room

temperature (note that water is going to be hot when you begin draining)

Remove top cover of cooler

Remove the float valve from the top of the cold water tank (not the

position as you will need to re-install when cleaning is completed)