PureScape 327 ™ Freestanding acrylic bathtub PureScape™ 327B Installation & Care Manual USA and CANADA www.aquaticaplumbing.com E: info@aquaticaplumbing.
PureScape 327 Freestanding acrylic bathtub Model: PureScape™ 327B Use Male Adapter Spg x MIPT - ABS DWV for Aquatica® bath wastes with Sch40 Waste Fitting Thread 1¹/₂ NPSM (1¹/₂ IPS) Male Adapter Spg x MIPT - ABS DWV for Aquatica® bath wastes with Sch40 hub outlet. Thread: 1 ½ NPSM (1 ½ IPS) 1¹/₂“ flanged brass tube for Aquatica® cable-drive and concealed bath wastes. Aquatica® Freestanding Bath Installer™ Male Adapter Spg x MIPT - ABS DWV for Aquatica® bath wastes with Sch40 hub outlet.
PureScape 327 Freestanding acrylic bathtub ™ Model: PureScape™ 327B 1 3 USA & CANADA INSTALL 2 ∅2.0” Sch40 Waste Fitting 4 HANDLE WITH CARE Installation is completed by applying silicone at several points between the bottom panel and floor.
PureScape 327 Freestanding acrylic bathtub ™ Model: PureScape™ 327B TYPICAL FREESTANDING BATHTUB INSTALLATION PROCEDURE Before you start: • Ensure that the floor is even. • The waste-overflow fitting is supplied with the product, however other accessories like the slip joint and adaptors are not included and must be purchased separately.
PureScape 327 Freestanding acrylic bathtub ™ Model: PureScape™ 327B INSTALLATION SEQUENCE continued 4 5 6 7 Male Adapter Spg x MIPT - ABS DWV for Aquatica® bath wastes with Sch40 hub outlet. Thread: 1 ½ NPSM (1 ½ IPS) Use Male Adapter Spg x MIPT - ABS DWV for Aquatica® bath wastes with Sch40 Waste Fitting Thread 1¹/₂ NPSM (1¹/₂ IPS) Please refer to our kit installation guide on page 6 • Picture 4: the water outlet pipe should be connected. • Picture 5: foot leveling lock nuts are adjusted.
Aquatica® Freestanding Bath Installer™ (Kit available separately - not included with bathtub) FEATURES • 18 Gauge Epoxy coated Metal Deck Flange • Designed to be installed in an 8” joist space • Can be installed with Waterproofing Membrane (*bronte™ NobleSeal TS Recommended) 93 " 8 238mm 11 " 4 32mm 41 " 8 103mm 2" 52mm • CSA Certified for Canadian and US markets KIT INCLUDES • 2 Brass Tailpieces (Fine Thread and Flanged) • Freestanding Bath Installer™ assembly with 1-1/2” DWV ABS tailpiece • Cutting
Aquatica® Freestanding Bath Installer™ (Kit available separately - not included with bathtub) INSTALLATION INSTRUCTIONS Attaches to Freestanding Bath W/O 1 A. Cut 6-1/2” (16.5 cm) hole into wood sub-floor (use supplied Cutout Template). B. Measure and cut ABS Tailpiece as necessary to ensure a secure connection to P-Trap below. C. Insert Freestanding Bath Installer™ assembly into floor opening and connect to Pipe below. D. Affix to sub-floor with 6 screws (not supplied) 2 A.
PureScape™ 327B - Maintenance Instructions PureScape™ 327B - Инструкция по уходу ™ PureScape 327B Hooldus juhend - Installation & Entretien PureScape™ 327B - Manuale per il corretto mantenimento PureScape™ 327B - Instrucciones para la correcta manutención PAA Ltd., Unijas street 12A, Riga, Latvia 13 EN 14516 CL1 CA-DA PAA-BT-SILKS-19/2013 max.