Instruction manual

CONTROLS IN DETAIL, CONTINUED
23. DELETE BUTTON : Press to delete images, use multiple selector buttons to select and press enter button to delete. Used in
conjunction with mode selector button (14) to format the card inside the camera
24. PLAYBACK BUTTON : Press to activate the monitor and review images.
25. MOISTURE ALARM WARNING DIODE : Warning LED will light up in the unlikely event of water penetrating the housing.
26. MENU BUTTON : Press to activate menu display, scroll using multiple selector buttons and select using enter button.
27. THUMBNAIL BUTTON : Press to display images in “contact sheets” of 4 or 9 images.
28. PROTECT BUTTON : Press to protect selected image from accidendal deletion.
29. ENTER / PLAYBACK ZOOM BUTTON : Press to acknowledge selected function or use for zooming in playback mode.
30. ISO CONTROL BUTTON : Press to select ISO, use in conjunction with subcommand dial control (# 34).
31. IMAGE QUALITY SELECTOR CONTROL : Press to access the different image quality available on the camera, use in
conjunction with subcommand dial control (# 34).
32. WHITE BALANCE : Press to access white balance functions, use in conjunction with subcommand dial control (# 34).
33. AUTOFOCUS MODE SELECTOR KNOB : It rotates clockwise and counterclockwise. use it to select the various autofocus
patern available. Refer to camera manual for in depth use.
34. MAIN-COMMAND INPUT KNOB : It rotates clockwise and counterclockwise. It can be used alone or in combination with
other controls to select or set various camera functions or modes. Refer to camera manual for in depth use.
35. FOCUS AREA / MULTI SELECTOR BUTTONS : These buttons have multiple uses. they allow the selection of the focus
area, in the menu mode, they are used to scroll up or down and left to right to choose from your menu selection and they
are used in the delete mode.
36. LATCHES : Three heavy duty latches with safety locks to protect against accidental opening.
37. REAR VIEW DISPLAY WINDOW : allow viewing of menu and images
38. SACRIFICIAL ANODES: (3X) zinc anodes are installed to protect your housing against salt water corrosion, theses are
made to deteriorate easier than the other strategic part of your housing, hence the name sacrificial anodes. These anodes
will need to be replaced as needed.
39. MOUNTING HOLES : Two 1/4” X 20 holes are provided for mounting strobes trays or accessories.
Page 4 of 14