Instructions / Assembly

— 6 —
Aquatic • 8101 E. Kaiser Blvd. • Anaheim, CA 92808 • [phone] • FAX [phone] • www.aquaticbath.com
Installation Instructions
4-Piece A
2
Composite Shower System Models
Fax on Demand # 1360
Fasten flanges along top of back wall with fasteners of choice (see Pre-
Installation Planning #12) into each corresponding stud. Pre-drill both
(vertical) side flanges and nail fasten to side studs 8” (200mm) on center.
NOTE: A stud should be added if adding accessories. Must have at least 1
fire block to secure vertically.
Level back wall vertically & horizontally. Shim if necessary.
17 18
Slide right side wall into position. Be sure locking mechanism is engaged.
NOTE: Caulking is not required, however, if using caulk, weep channel must
remain clear of obstruction to allow for proper drainage of the unit.
19
Check for level. Shim if necessary.
20
INSTALLATION PROCEDURE, CONT.