Users Manual

Getting Started BC Basic Media Player
www.aquaticav.com 4
1.4 Power On
The BC Basic requires +12V dc to both the red and yellow wires. When both of these wires have power, the
BC Basic is always powered on and is indicated by a red LED coming out of the heatsink of the stereo.
Ground is connected to the Black wire.
In a SPA application, this requires the red and yellow wires to be jumped together and tehn connected to
+12V dc output of the power source. In this set up, the BC Basic will always be on, with a very low current
draw when idle.
In a bot, ATV or other application requiring power from a battery, the yellow wire (constant power) should be
connected to the battery, and the red wire connected to the ignition or a switch.
For detailed instructions, you can check out our online video:
"How to wire your Aquatic AV stereo system"
http://www.aquaticav.com/support/videos