SERENITY STUDIO 22 Specification Sheet
90
  SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation 
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
January 2008
Rough-In Plumbing 
Measurements 
SErENITy STudIO 22
  SErENITy STudIO MODEL # AI22AIR6636C / AI22AIR6636CTO (Tub Only)
GENERAL SPECIFICATIONS:
Tub Size  66” x 36” x 24”
    168 cm x 91 cm x 61 cm
Bathing Well  40” long
    22 1/2” wide
    21” interior depth
Shipping Weight  189 lbs. / 86 kg
Tub Weight Filled  844 lbs. / 384 kg
Tub Weight Only  123 lbs. / 56 kg
Gallons to Overow  87 gal. / 329 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater  1 HP; 10.5 AMP; 120V
Requirement  15 AMP; 120V, separate circuit 
    required protected w/ Class A GFCI
Air Bath System:
- 67 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:
- Chromatherapy
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Pre-leveled ABS Support Base 
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
STANDARD EQUIPMENT:
•  Comfort Pillow - Oval or Rectangle
•  Bolt-On Grab Bars
  -  White, Biscuit, Chrome, Polished Brass, Gold, 
    Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•  Lift & Turn Waste and Overow 
  -  Chrome, Polished Brass, Gold, Polished Nickel, 
    Satin Nickel or Oil Rubbed Bronze
•  Cable Drive Waste and Overow 
  -  Chrome, Polished Brass, Gold, Polished Nickel, 
    Satin Nickel, Oil Rubbed Bronze or 
    Color Matched (Bone, White and Biscuit 
Only) 
•  Waterproof Remote Control with infrared 
  sensor and 25’ cord
•  Remote Blower Wiring Kit
•  Factory Installed Tile Flange
•  Premium Colors
All acrylic colors featured by Aquatic match the 
industry’s leading xture manufacturers.
OPTIONAL EQUIPMENT:
Each Serenity Studio model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem-
perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air 
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
Two Person Bath
33 1/2”
36”
22”
24”
66”
63”
20 1/2”
Standard 
Blower
Location
 Deck Width
4”
36”
22 1/2”
40”
Deck Width 3 3/4”
Fax-On-Demand
Document # 1002
2 1/4”
10 1/2”

