Technical data

Electronic scale eliminator ANTICA
++
11
Timer TM-6331
(Daily and weekly programming).
Button functions:
CLOCK Indication and time setting
DAY Day setting
HOUR Clock setting
MIN Minutes setting
TIMER Selection of individual time duration On/Off
MANUAL Manual operation On/Off
R Accepts all settings and starts the program
Installation:
Take out the screw located on front panel in right corner. The plate
with terminals is located there. Affix the plate and connect wires in
accordance with schematic. Close the cover and connect to power.
Press button “R” to start the device.
Warning:
• The installation must conform to the local electrical code.
• Timer can be used to switch safety voltage in accordance with
STN 341010
Timer setting.
Day setting.
When setting time/day depress and hold the CLOCK button and
subsequent pushing of the buttons DAY (HOUR, MIN) sets the day of the day of the week, (hour
and min).
Setting the timers On/Off (times setting).
1. Press the TIMER button that starts the program of the first timer.
2. Pres the DAY button to set the week day when the timer starts ON.
It is possible to set:
• Each day individually
• All working days
• Saturday and Sunday only
• All days... 15 variations altogether.
3. With button HOUR the starting hour is set.
4. MIN button sets the starting minute.
5. Button TIMER is programmed OFF time of the first timer.
6. Repeating the above instruction #2 to #5 set all the desired On/Off times.
7. Second time pressing the TIMER button provides for checking of the program.
8. The programming can be interrupted or finished by pressing the CLOCK button.
9. The timer operates the program only when the timer is set to AUTO. By pressing the AUTO
button a second time, the timer switches to ON or OFF display.