User's Manual

ManualsBrandsAquaTech ManualsPhotographyAxisGO Water Housing for iPhone XS or X

Instruction Manual

Congratulations on purchasing your AxisGO.

The AxisGO opens new possibilities to advance

your iPhone

photography and cinematography,

all the while staying connected to friends and

family via instant social media sharing, SMS

even phone calls.

Please read the following instructions and care tips

before using your AxisGO for the ﬁrst time. You can

also visit our website and YouTube ch a nn e l for

more tips and information.

Package Contents

nAxisGO

nStandard Lens Port

nWrist Lanyard

nInsert Card with Instructions

nO-Ring Grease Tube

nO-Ring Removal tool

Ta bl e of Co nt en ts (click to go there)

Page 1 Package Contents

Page 2 Nomenclature

Page 2 Initial Setup and Water Testing

Page 3 Installing your phone

Page 3 Venting the AxisGO

Page 3 Underwater Use

Page 4 iPhone Camera App

Page 4 3D Touch

Page 4 Battery Life Tips

Page 5 Safety Information

Page 5 Care and Maintenance

Page 6 Warranty

Page 6 Legals

Summary of content (6 pages)

PAGE 1
Instruction Manual Congratulations on purchasing your AxisGO. The AxisGO opens new possibilities to advance your iPhone® photography and cinematography, all the while staying connected to friends and family via instant social media sharing, SMS® or even phone calls. Please read the following instructions and care tips before using your AxisGO for the first time. You can also visit our website and YouTube channel for more tips and information.
PAGE 2
Nomenclature Attach the included Wrist Lanyard by tying the tether to the leash attachment point. Only attach the leash to the side hinge locations as shown. It may be easiest to install the leash with the handle open. Check the main O-Ring is located in its correct position as seen in fig 2. and is in good condition. fig 2. Initial Setup Before using your AxisGO for the first time you must conduct a water test as explained below.
PAGE 3
the back-plate edges, then point it down and check the edges of the front port for any water that may have penetrated. Water can enter the AxisGO when opening the backplate, so do not confuse this with a leak. 3 If this is all clear and there has been no ingress, repeat Step 1 and hold the AxisGO under the water for 30 seconds. 4 Repeat step 2, and if no water has entered you are ready to install your iPhone and begin shooting.
PAGE 4
n Keep the camera app open before you submerge Touch in the phone settings altogether. n Select your preferred capture method first (ie: photo or video etc.) Settings>General>Accessibility>3D Touch All settings can be changed as soon as you resurface with your AxisGO. iPhone Camera App Your AxisGO allows full control over the iPhone camera App. When you have launched the app it is easy to swipe through capture modes, swap between front and rear cameras, review pictures and use the shutter button.
PAGE 5
n If using your phone above water only, set the ‘Auto-Lock’ to 1 minute. Settings>Display & Brightness>Auto Lock Safety Information n Do not exceed depths of 10m/33ft. n Do not exceed depths of 3ft without a phone installed in the AxisGO. n Store in a cool, dry area. n Keep your AxisGO in the provided soft case when not in use. n Use the provided grease periodically on the rear main and lens port O-Rings to reduce friction and increase operating life.
PAGE 6
Warranty - AxisGO – 1 Year Product Warranty How to get service We make every effort to ensure that our products are made from the highest quality materials and workmanship. Should you not be completely satisfied with one of our products, we encourage you to contact us so that we can promptly resolve any problem you may be experiencing. Our company representatives will deal with your issue quickly and decisively. Email contact@aquatech.net and we will advise where to send your product.