Use and Care Manual

AQUASURE PREMIER SERIES

1. Place the faucet base over the drilled hole and make sure the

hole is completed covered by the faucet base.

2. Insert the faucet shank through the faucet base and drilled hole

completely.

3. From under the sink slip the large, black washer over the faucet

shank. Next, slip the lock washer over the faucet shank followed

by the thin chrome nut.

4. While holding the faucet assembly above the sink tighten the

chrome nut below the sink with an adjustable wrench. Tighten

the chrome nut until the faucet assembly does not move.

(A faucet wrench is recommended if the space for proper

mounting is very limited)

CAUTION! Do Not over tighten the adapter to avoid breaking

and leak.

5. Attached the faucet adapter to the shank.

1. Attached the tank ball valve on top of the tank.

CAUTION! Do Not over tighten the adapter to

avoid breaking and leak.

Dia. F-1

STEP 4. Drinking Water Faucet Installation (See Diagram G-1)

STEP 3. Tank Ball Valve Installation (See Diagram F-1)

Instruction continues on the next page

Faucet Shank

Black

Washer

Counter

Lock Washer

Chrome Nut

Faucet Adapte

Faucet Base

Pure Water Line

Dia. G-1