Manualshelf

Use and Care Manual

ManualsBrandsAQUASURE ManualsKitchenHarmony Lite Compact ALL-In-One 32,000 Grain Whole House Water Softener with Triple Purpose Pre-Filter
11121314151617181920
15
AQUASURE HARMONY SERIES
1. Place the unit in the bypass position. Locate the nearest faucet and remove aerator
(faucet screen) if there is any. Turn the cold water position on at the nearest faucet and
slowly turn on the main water supply. Let the water run for a few minutes or until the
system is free of any air or foreign material.
2. Make sure there are no leaks in the plumbing system before proceeding and shut off the
nearest faucet when water runs clear.
Bypass
Position
Service
Position
WARNING! If the system is leaking at all, turn the unit to the bypass position and shut off main
water supply before assessing leak.
STEP 5. Flushing and Testing the Plumbing Lines
IMPORTANT! Flushing the system lines is necessary to ensure that all plumbing work has been
done correctly, that there is no debris or air trapped in the piping, and that there are no leaks.
IMPORTANT! The system is not ready for service until you complete the “System Initialization”
section of the owner’s manual.
(Page 13)