Manual

877.768.2717 fax 877.276.POOL Outside the U.S.: 1.805.620.5060 fax [phone]
[e-mail] www.aquastarpoolproducts.com
1. 32" three-port manufactured sump bucket
2. 32" channel drain, cover, flat
3. 2" NPT plug, qty 2
4. 32" channel drain, plaster shield
5. #10 x 3/4" flat head phillips type-a screw,
316ss, qty 16
SPECIAL NOTE:
1) "HALF-PIPE" DIVERTER INCLUDED WITH ALL "FL" (FLAT)
CHANNEL DRAINS SHOULD BE USED WITH ALL SINGLE (1)
& TWO (2) PIPE INSTALLATIONS WHEN TOTAL FLOW RATES
EXCEED 250 GPM.
2) USE SILICONE WHEN SETTING DIVERTER FOR REMOVAL &
RE-INSTALLING WHEN WINTERIZING, DRAINING, ETC.
3) IF SINGLE PIPE: SILICONE DIVERTER ABOVE PORT OR PIPE -
ON CENTER
4) IF TWO PIPES: SILICONE DIVERTER ABOVE PORT OR PIPE
NEAREST TEE CONNECTION TO PUMP.
3
2 4
5
1
32-19/32
3-27/32
5/16
4-11/32
1010
2-1/2" spigot x 2" socket x 2" NPT
Notes: unless otherwise specified.
Plaster shield and screws to be removed
after installation.
1
2
4
3
32-13/16
4-1/16 3-5/16
1-1/4
3/8
1. 32" channel drain, flat,
no sump, frame
2. 32" channel drain, flat,
no sump, cover
3. 32" channel drain, flat,
no sump, support, “dog bones”
to be removed prior to suction
outlet cover installation
4. #10 flat head phillips screw, qty 8
32CDFLxxx
32CDFLFRxxx