Manual

[e-mail] www.aquastarpoolproducts.com 11
IMPORTANT
• Model:32PDxxx
• Singleormultipledrainuse
• AtIAPMO(anationallyrecognized
testing lab), the Propeller™ Drain 3/4”
sump and cover was tested with no
additional sump depth
• AllAquaStarchanneldrainsare
VGB 2008 compliant
• Plumbingtooneortwopumpsplus
skimmerequalizerareapproved–
DO NOT exceed maximum ow rate
of outlet cover for total system
• One-pipeconnectionmustbea
minimum2”pipesizeandcentered
along channel slot in sump
• Anyplumbingcongurationis
approved but do not exceed
maximum ow rate
• IMPORTANT:Tobeconsidered
unblockable, the Propeller™ drain
sump must be permanently and
securely axed to become an
integral part of the pool oor using
epoxy (ie. Aquabond UW 5000)
around the entire edge and all of the
enclosed plastic anchors or optional
brass anchors.
32PDxxx INSTALLATION CONTINUED
The sump must be permanently and securely axed to the pool oor using epoxy (ie. Aquabond UW
5000) under the sump and around the entire edge and all of the enclosed plastic anchors or optional
brass anchors. Once this is completed, the sump becomes a permanent part of the pool structure,
creating an unblockable drain. The drain cover is then axed to the sump using the designated screws.
g. 4
PLASTER
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
STEP 4
GRAVEL
SHOTCRETE/GUNITE
TWO-PART
EPOXY
UNBLOCKABLE SUMP
AFFIX THE UNBLOCKABLE SUMP TO THE POOL FLOOR
USING THE INCLUDED
#10 X 1" SCREWS
g. 5
PLASTER
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
STEP 5
GRAVEL
SHOTCRETE/GUNITE
TWO-PART
EPOXY
UNBLOCKABLE SUMP
SEAL PERIMETER WITH
EPOXY OR SILICONE
g. 6
PLASTER
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
STEP 6
GRAVEL
SHOTCRETE/GUNITE
TWO-PART
EPOXY
UNBLOCKABLE SUMP
AFFIX THE PINHOLE ANTI-ENTRAPMENT SUCTION
OUTLET COVER TO THE UNBLOCKABLE
SUMP USING
THE INCLUDED #10 X 3/4" SCREWS
EPOXY OR SILICONE