Installation Guide

6
Lowes.com
ASSEMBLY INSTRUCTIONS
7. Remove the preassembled screw (B) and cap (C) from
the spout (A) and place the spout (A) onto the middle
body (P). Then secure the spout (A) with the screw (B)
and insert the cap (C).
7
A
B
P
C
8. Connect one end of each hose (T) to the two
connectors on the middle body (P) and the other end
of the hoses (T) to the cold end valve (J) and hot
end valve (U). Gently bend the hoses (T) to
in the
available space underneath the deck.
8
T
T
U
J
P
9. Connect a 1/2 in. IPS faucet connector (not included) to
the water supplies underneath the sink using wrenches
(not included).
Note: Refer to the local plumbing codes for
permissible types of water supply connectors.
9