Instructions / Assembly

Once filter is installed, plug filtration dock into an electrical outlet.
Flush the System for one Cycle
• Place lid on dispenser.
• Fill it with cold water through drop-shape.
• Place on the filtration dock until fully locked in.
• Hold dispenser button down until all water has filtered through
the unit. Discard water. Flushing is complete.
WATER DISPENSE BUTTON
It
may take
2-4 MINUTES
or more for
water to begin
flowing on
1st run
To dispense filtered water, push button on reservoir lid. There
will be a 5-10 second delay for water to filter through.
Please wait for system to finish filtering before removing the
dispenser from the dock.
Once dispenser is removed there may be residual water left on
the dock; this is normal.
Please note: Water may leak from circular valve when placing dispenser
onto dock.