Other

AquaRest Spas Pre-Planning Guide • PAGE 7
Electrical Requirements for 240V*
• 240V electrical connections must be completed
by a Certified Licensed Electrician. A GFCI AND
A DISCONNECT SWITCH ARE REQUIRED: The
National Electrical Code requires that spas connected
to 240V circuits be equipped with a GFCI and
Disconnect Switch. See National Electrical Code
Articles 680-12 and 680-42.
• ISOLATED, DEDICATED 240V, 30 OR 50 AMP
CIRCUITS ARE REQUIRED.
• All 240V operations wiring must be permanently
hardwired, installed in grounded conduit and installed
in compliance with the National Electrical Code and
all local codes.
• WARNING: USE COPPER CONDUCTORS ONLY!