Other

AquaRest Spas Pre-Planning Guide • PAGE 4
Site Selection
Before proceeding, please read the ‘Important Safety Instructions’ at the
beginning of the owner’s manual, available on our website,
AquaRestSpas.com/Owners.
1. Electrical Connection. Installing your new Dream Maker Spa couldn’t be simpler. After filling your spa, just
plug it in to any standard 120v / 15 amp outlet for power.* Do not use an extension cord. If you prefer, our models
can be hardwired by a certified electrician.
*To avoid nuisance circuit breaker tripping, it is best to use an outlet on a circuit which does not supply power to any
other major running appliance. This can be checked by turning off the circuit breaker that supplies the intended outlet
and verifying that no other electrical devices no longer work, such as a refrigerator, dishwasher, washing machine,
coffee maker, hair dryer, etc.
2. No Overhead Power Lines. Do not locate your spa under overhead power lines or in proximity to
existing buried or exposed electrical circuits. See your electrician.
3. Childproof Your Spa. Plan for limiting access of children. Precautions such as self-closing and locking
gates or access doors, fencing and other child barriers, as dictated by the site.
4. UL Safety Cover Required. In addition to its insulating factors, a good cover also provides a measure
of additional protection from unwanted access. Your AquaRest cover is classified by the Underwriters Laboratories
meeting ASTM F1346-91 requirements.