Pre-Delivery/Install Checklist

Surface Suggestions:
Travertine
Synthetic
Wood
Stone/Slate
Brick Pavers
Cement
Stained
Cement
Site Selection
Provide a solid load-bearing site:
CAUTION: Your spa must be installed on a level, flat, solid load-bearing surface.
Do not locate the spa on a surface that can be damaged or altered by water.
● Concrete slabs and decks must be designed to support this weight. Do not select a site
composed of individual unsupported bricks, blocks, grass or other materials which will shift
unevenly and cause damage to your spas internal frame.
● Provide a level, flat site:
○ A level site is critical to both the performance and enjoyment of your spa. Water is
unforgiving and will always settle level. A flat and level site provides the surface
necessary to properly dispense weight between the foot well (which bears most of
the spa’s weight) and the structural frame which primarily provides stabilization and
secondary support.