Users Manual

3. Pair up Aqua-eegg with your phone

a. For first time use, you need pair Aqua-eegg to your phone. Make sure your phone is within 164

feet (50 meters) from the Aqua-eegg, and enable Bluetooth, allow the App to obtain positioning

permissions and synchronize the local time for regular tests.

b. Start the AquaIOT App on the phone. Scan the QR code on the Aqua-eegg and add the device for

the first time. The App will automatically search for and connect to the Aqua-eegg. If the connection

is successful, the message "Conneted successfully" will be displayed on the screen. That means the

pair up process succeeds.Otherwise restart the App and repeat the steps above to connect.

c. After the connection is successful, Aqua-eegg wil automatically synchronize with the mobile

phone time. It will test every exact hour from 9:00am and 5:00pm by default. To make the test more

stable, manual testing is not possible at other times.

NOTE: After successful pair up, you could choose one of the two communication modes: Bluetooth

or WLAN. If the Aqua-eegg is set to Bluetooth communication mode, please make sure to connect

it by App after the Aqua-eegg is restarted, then the test can be conducted normally.

S/N XXXXXXXXXXXX

FCC ID 2AWOS-AQUAEEGG2