Manual

Transmitter

To help you better understand your transmitter and its functions,

here is a picture outlining the operational features.

1. Steering Wheel

2. LED power on indicator

3. Power ON/OFF button

4. Throttle trigger

5. Steering rate adjustment

(this is used to increase

or decrease the turning

radius of the boat)

6. Throttle reversing switch

(“R” is the position the

switch needs to be in for

your P-27 Gunslinger)

7. Throttle Trim dial (this

should be in the 2:00 o’clock position)

8. Steering trim (this is used to adjust the tracking of the boat)

9. Steering reversing switch (this should be in the “N” position

to operate your P-27 Gunslinger)

Assembly

INSTALLING THE TRANSMITTER BATTERIES:

1. Install 4“AA” batteries into the transmitter in the conﬁ guration

molded into the battery ﬂ oor. Slide the lower cover off the

bottom of the transmitter. Install the 4 AA batteries using the

battery positions marked in the lower battery tray. Slide the

battery cover back in place. It will snap into place.

2. Turn the transmitter “ON” by pressing the button on the right

side of the transmitter. The battery level indicator light (LED)

should glow red. If the LED is ﬂ ashing the batteries are low

and need to be replaced or rechecked for incorrect installation.

BATTERY PACK INSTALLATION

1. Remove the canopy by rotating the lock near the front of

the hatch.

2. Lift and remove the cowl from the boat