User Manual

3
HOW IT WORKS
Rather than connecting to your pool’s filter or requiring a booster pump, your cleaner is equipped with its own built-in
Pump Motor that provides it the ability to vacuum dirt and debris independently. An internal, reusable Filter traps the
debris allowing only clean water to pass through. The filtered water that is expelled is efficiently used to hydraulically
drive or “jettison” your cleaner about the pool.
1. The Pump Motor sucks in water, dirt and debris.
2. Large leaves, dirt and
debris are separated by
offset Debris Intake Ports (to
avoid clogging) and are then
trapped within the internal,
reusable Filter Bag.
3. The micro-filtered water travels upwards to the Directional Valve Flap
which forces the water out either front or rear Jet Propulsion Valve Port.
The forced water provides thrust to hydraulically jet propel your cleaner
to roll about your pool as it circulates the water.
Saving Your Wallet & The Planet
Mobile Filtration System
Your cleaner vacuums and traps fine dirt and large debris internally, reducing the work load from your pool’s filtration
system. In essence, your cleaner is a mobile filtration system that works without hoses or costly, energy consuming main
pool pumps or booster pumps. Your pool’s main filtration system will therefore require less cleaning and operating time.
Less main filter system cleaning (if backwashing is needed to clean it) to the tune of thousands of gallons of water saved
annually, and save you up to 80% of filter media replacement (be it cartridge, D.E., sand or equivalent), plus extend the life
of your pool’s filter and pump.
Eco-Efficient
Every hour that your cleaner works to keep your pool clean is an hour that you may run your pool’s filtration system less
by up to 70% in total, which can save you as much as $2,000 a year in energy. Your cleaner’s pump redistributes chemicals
suspended in the lower, cooler, chemically rich waters within your pool to mix with the warmer, chemically depleted water
above. By doing so it provides a more uniform chemical composition yielding a healthier swimming environment and a
more accurate water test sample. That plus a cleaner pool means less chemicals needed - by as much as 30% less. The
same powerful mixing action can raise temperatures in lower waters by several degrees, saving you even more money
and energy by reducing heater usage. This mixing also saves you even more water by decreasing the temperature above
resulting in reduced evaporation. And by reducing main filter backwashing / cleanings you save both thousands of gallons
of water annually and as much as 80% of filter media replacement, while greatly reducing the negative impact chemically
treated water has by entering the environment. It feels good to save money and really great when you’re also doing your
part for our environment!