Specifications

ManualsBrandsAqua Systems ManualsHome building and DecorAQLP Series

This menu will appear only if the Lights are configured for timeclock. The lights will turn on

and off at the designated times. The only override on this function is manual on/off control

by the “Lights” button.

This menu will appear only if the Lights are configured for countdown timer. This setting is

the time after you manually turn on the lights until the Aqua Logic automatically turns off the

lights. You can also manually turn off the lights at an earlier time by pressing the LIGHTS

button. If the Lights relay is on during the programmed off time, it may be because of freeze

protection.

Aux1 and Aux2 configurations are identical.

This menu will appear only if the Aux1 is configured for timeclock. The Aux output will turn

on and off at the designated times. If the Aux relay is off during the programmed on time—

note that some pool equipment (example pressure side pool cleaner) can only be operated

when the filter pump is running and the pool/spa valves are in the pool-only position—the

Aqua Logic will keep the relay off until these other conditions are suitable for operation. If

the Aux relay is on during the programmed off time, it may be because of freeze protection.

Also, manual operation overrides the timeclock.

This menu will appear only if the Aux1 is configured for countdown timer. This setting is the

time after you manually turn on the Aux relay until the Aqua Logic automatically turns off the

relay. You can also manually turn off the relay at an earlier time by pressing the AUX1 button.

Note: Separate chlorinator output levels for the pool and spa must be set. If the valves

are in the pool-only or spa spillover positions, then the chlorinator will operate accord-

ing the pool setting. If the valves are in the spa-only position then the chlorinator will

operate according to the spa setting. The actual amount of chlorine introduced into the

pool/spa is determined by: this output setting, the amount of time the filter pump is

running, the water temperature, and the amount of salt in the water. Also see Start/Stop

Superchlorination below.

Start/Stop Superchlorination

1. Press the “MENU” button repeatedly until “Settings Menu” is displayed

2. Press the “>” button repeatedly until “Super Chlorinate” is displayed.

3. The display will show whether superchlorination is “on” or “off”.

4. Press “+” or “-“ to toggle between “on” and “off”

Note: Once started, superchlorination will run for the programmed number of hours

(Timers Menu/Super Chlorinate Hours) or until you manually turn it off.

Superchlorination may be temporarily interrupted for a programmed spa operation.

Program a Timeclock

1. Press the “MENU” button repeatedly until “Timers Menu” is displayed

2. Press the “>” button repeatedly until “xxx—all” or “xxx—wkend” (where xxx is the parameter

that you want to program) is displayed.

3. Use the “+” and “-“ buttons to set the desired start time, then press “>” to switch to the off

time. Use the “+” and “-“ buttons to adjust the off time. If you are setting the “weekend”

timeclock, press “>” to go to the “weekday” settings.

Note: During the programmed time, there may be other automatic or manual opera-

tions that prevent the relay/valve from operating—see a more detailed discussion under

Automatic System Operation/Timers Menu/Aux Timeclock or in Troubleshooting/Diag-

nostic Information.

Program a Countdown Timer

1. Press the “MENU” button repeatedly until “Timers Menu” is displayed

2. Press the “>” button repeatedly until the “xxx—Timer” (where xxx is the parameter that you

want to program) is displayed.

3. Use the “+” and “-“ buttons to set the desired timer period.

Note: A setting of 0:00 will display as “manual on/off”. The countdown automatic

turn off function is disabled but manual operation is still permitted. There may be other

automatic or manual operations that prevent the relay/valve from operating—see a

more detailed discussion under Automatic System Operation/Timers Menu/Aux Timeclock

or in Troubleshooting/Diagnostic Information.

Set Day and Time

Wednesday 10:37P

Adjust time setting

Move between start and stop times & to previous/next menu item

Lights-all

8:00P to 11:00P

Adjust time s

Lights-wkend

8:00P to 11:00P

Lights-wkday

8:00P to 11:00P

Adjust time setting

Move between start and stop times & to previous/next menu item

Lights-CountDn

0:20

Adjust time setting (Manual On/Off, 0:05, 0:10, 0:15...)

Move to previous/next menu item

Set Day and Time

Wednesday 10:37P

Adjust time setting

Move between start and stop times & to previous/next menu item

Aux1-all

8:30A to 4:00P

Adjust time s

Aux1-wkend

8:30A to 4:00P

Aux1-wkday

8:30A to 4:00P

Adjust time setting

Move between start and stop times & to previous/next menu item

Aux1-CountDn

0:20

Adjust time setting (Manual On/Off, 0:05, 0:10, 0:15...)

Move to previous/next menu item