Installation guide

AQUA SPAS Gold TV Spa Installation Guide
Aqua Spas 15
Radio Operation
Turning the Radio On
To turn on the radio simply press the button. When is pressed, the volume will automatically rise and the last used radio station
will begin to play.
Selecting Stations / Tuning
To scan for a radio station, hold the button for 2 seconds. The screen will now display ‘TUN’. Press or and the radio will
scan through all channels until it finds a radio station. If you’re in an area of poor signal quality, it is recommended that you tune the radio
manually.
To tune manually, simply press and then use the and keys to select a frequency.
Memory
To save a radio station to memory, Immediately after selecting the radio station, press . Each time you press the spa will increase
the Memory Channel.
There are a total of 10 memory channels.
To recall a channel of memory, simply press the button. Each time you press the button the Memory channel will increase.
Adjusting the Volume
Whilst the spa is in radio mode, press the and buttons to adjust the volume.
LIstening to External Audio Devices (Inc DVD Player)
To listen to an Auxiliary Audio Device, press the button until AUX is displayed on the panel.
Ensure than an auxiliary device is connected up to the spas control panel.