Installation guide

AQUA SPAS Gold TV Spa Installation Guide
Aqua Spas 14
Turning on Jets, Pumps, and Lighting
To turn on a feature in the Hot Tub, simply press the to move the arrow, then press OK to turn your selected feature on or off.
Page 11 of this manual shows what all the icons above represent.
Hold for 2/3 seconds and all of the spas features will turn on gradually.
Please Note:
- The Fan Pump will automatically turn itself off after 30 minutes.
- The water pump will not initiate if the water level is too low.
- Pump 3 is the circulation pump and will automatically operate when the heater is in operation or when the tub in in Filtration mode. You can
not manually turn on Pump 3.
Ozonator
The Ozonator inside your spa produces a natural chemical found in water. Ozone reduces the need for chemicals and sanitisers. The ozonator
turns itself on whenever the circulation pump is in action.
Low Temperature Protection
When the temperature of the spa drops below 5°C, the spa will turn on both the circulation pump and the heater until the temperature in the
water rises above 8°C.
Locking the Keypad
To lock the control panel, simply hold the button for 3 seconds until the panel displays the symbol. To unlock the keypad, simply
hold the button for an additional 3 seconds until 'UNLOCK' is displayed on the panel.