Operating instructions

Error code Meaning Additional Info

0x00 Unknown parameter 0

0x01 Parameter is read-only sub-index

0x02 Value out of range due to max/min value sub-index

0x03 Wrong sub-index sub-index

0x04 Parameter is no array 0

0x05 Wrong data type (wrong data length) 0

0x06 This parameter may not be set, only reset sub-index

0x07 Descriptive element is read-only sub-index

0x09 No description available (only value) 0

0x0b Process control not possible 0

0x0f No text array available (only value) 0

0x11 Not possible in current state 0

0x14 Value out of range due to drive state/configuration sub-index

0x15 Reply too long (more than 240 bytes) 0

0x16 Wrong parameter address (unknown or unsupported value for

attribute, element, par. number or sub-index or illegal combi-

nation)

0x17 Illegal format (for writing) 0

0x18 Value amount not consistent 0

0x65 Wrong axis: action not possible with this axis -

0x66 Unknown service request -

0x67 This service is not possible with multi parameter access -

0x68 Parameter value can not be read from bus -

VLT

Profibus 5. How to Access the Parameters

MG.33.C4.02 - VLT

is a registered Danfoss trademark