Operating instructions

NB!

DP V1 diagnosis is supported for Profibus SW version 2 and higner. This means that

the default setting of the Profibus option is DP V1 diagnosis. If DP V0 diagnosis is

required, the setting under

DP slave Properties

must be changed

Download the configuration file to the PLC. The PROFIBUS SYSTEM should be able to go online

and it will start to exchange data when the PLC is set to Run mode.

VLT

Profibus 3. How to Configure the System

MG.33.C4.02 - VLT

is a registered Danfoss trademark