Troubleshooting guide

5
Saving Your Wallet & The Planet
Mobile Filtration System:
Once the dirt is vacuumed into your cleaner’s body it is immediately trapped and filtered by its internal,
reusable Filter Bag system, which traps the dirt and debris - so your pool filter system doesn’t have to work so hard. In essence, your
cleaner is a mobile filtration system that works without hoses or costly, energy consuming main pool pumps or booster pumps. Since
everything is trapped within your cleaner your pool’s main filtration systems will need less cleaning, which can save you thousands of
gallons of water annually if it normally requires backwashing and your cleaner will save you as much as 80% of filter media replacement,
plus extend the life of your pool’s filter.
Eco-Efficient: Every hour that your cleaner works to keep your pool clean is an hour that you may run your pool filtration system less
by up to 70% in total - saving you as much as $2,000 a year in energy. Your cleaner’s pump is so powerful that it can actually redistribute
chemicals that have become suspended in the lower, cooler , chemically rich waters within your pool to mix with the warmer, chemically
depleted water above. By doing so it provides a much healthier swimming environment due to the more uniform chemical composition,
a reduction in overall chemical consumption due to a more accurate water test sample and because cleaner water means less chemicals
used. The same powerful mixing action can raise temperatures below by several degrees, saving you more money and energy by reduc-
ing heater usage, while also saving you more water by decreasing the temperature of the water above, resulting in reduced water evapora-
tion, including saving thousands of gallons of year by reducing main filter backwashing needs by as much as 80%. Additionally, you can
be proud knowing that you are doing your part to help protect the environment as your cleaner reduces the impact of chemically treated
water from entering the environment and decreases the use of chemicals, water and energy.
OPERATING FEATURES
This manual has been created to represent the set-up and troubleshooting practices required for a variety of Aqua Products
cleaners. Although the shape and color of some components featured herein may not be identical to those of your cleaner,
their operating and service procedures are. As there are a variety of features and components applicable to the various
models produced, some pages may show features not available on your cleaner model. Please disregard these while fully
reviewing the material applicable to your specific cleaner model.
Figure 1
Body 1.
Jet Valve Housing2.
Wire Support Frame3.
Handle4.
Side Plate5.
Non-marring Wheels6.
Locking Pin7.
Locking Pin Hole(s)8.
Protective Motor Screen9.
Filter Bag10.
11. Pump Motor
12. Axle Guard
What’s inside?
1
2
3
5
5
8
9
12
11
10
7
4
6
5
8